2021年4月16日星期五

Marijuana Growth Diary-The Importance of Marijuana Growth Lights

Hello everyone, our first Marijuana growth is still pursuing the first successful harvest. As you can see from the plants behind me, I planted some beautiful big flowers this time. Super excited to show everyone the preparations to get here and some of the battles we must face. I use Danlan cubes again as my growth medium. I just wet the small cubes and put the seeds in. No other work is required, and it seems that the seeds can germinate well whether it is using hemp plants or other plants. After the seeds germinated, I took the seeds out of the dark, moved them into a mesh cup and container, and then moved the plants into the light.

9w4vfzeu76cm388pj

At this point, I provide plants with 20 minutes of direct sunlight and Marijuana LED lighting every day. Learning from my last growth attempt, I want to make this plant as small as possible. Therefore, I will rank the factory first. When I was three weeks old, my plant had developed four node or leaf positions, starting from the fifth. I decided to cut the main stem above the fourth node and remove the leaves and branches that emerged from the first node, which are usually smaller and weaker in appearance compared to higher branches. At this point, I started to train the plants with ropes to guide them where I wanted to go, and reduce more and more indoor plant lighting every day. Before about half of the third week, I had almost no timetable to turn on/off the fluorescent lights at 12-12. At five weeks of age, this plant begins to germinate. The reduced sunshine time in autumn is the main key to helping me bloom. In the summer, when the surrounding light was too strong during the dark period to bloom, I made some unsuccessful attempts.

 

During the early flowering and budding period, the plant continues to grow rapidly. When they appeared, I took the opportunity to remove all the leaves that looked unhealthy, and removed some of the lower leaves and branches buried under the plant canopy. By the age of eight weeks, the plant will begin to bloom. All my main stems have cola and multiple bud parts at their ends. The branches sprout from everywhere, where there are buds, which is incredible, and buds are growing every day. In addition to the pre-vegetative micro-growth and flowering of all plants, I also added large buds to the hydroponic storage as supplementary nutrients to help these buds grow as large and juicy as possible.

Lgv52oekzgvsyny

I have been waiting for the end of mybuds. One day, I noticed some small errors crawling on myclones. Until now, I have always hoped that my positivity and optimism would prevent the mites from breaking out, but inspections of my main plants showed that the mites were actually crawling on my plants. Once you know where to look for these little guys, it is easy to find them. They wandered under the leaves, ate the plants, and laid their eggs there. These bite marks are easy to see when spider worms sow seeds around the leaves. They all leave small spots on the leaves of plants, which can alert you to possible pests. After realizing that my worm lives on this plant, the war was officially declared, and now it's time to save my harvest! I took the plants to an open space and began to invade. I cut the branches and leaves. Anything I saw with a lot of mites was cut off and discarded.

842676_0bntqxf54isd

After researching household products that can be used as insecticides, I decided to make a mixture of 9 parts water and 1 part alcohol and spray it under Myleaves. I can say that any mites sprayed with alcohol will stop moving after spraying. Although I think spraying with alcohol is effective, since then, I do have to conduct daily inspections of my plants. Look for mites and vacuum, or spray or cut leaves individually wherever I see mites. This brings us to the present, this kind of plant has buds everywhere, they are growing every day, and we hope to get a good harvest.

 

2021年3月11日星期四

The best method for suspending lights to get more height

Everyone will have 2x4 2x4 about 510, so in today's video we must focus on our LED growth lamp. This shows how to hang it, so I want to share China's VANQ LED lights with others. I have this line suspension mechanism, standard long light LED, in the article, you will learn how to fix the luminaire in the tent. It is very good to get a good height from the carbon filter, which is very good, this will be very high.

 

If I can hang it, I only have a very powerful, depending on the type of light, you can get most of the standard to grow lights China Omama and similar weapons, usually you will fill in these wires here, then all the will Connect wire, then connect them here, connect to light here, so everything we have to do is like this Nnocent, instead, we will be used as structural support, but transfer them to all the side, Then turn it over, we will turn it out here, cut all hooks, we will cross the terminal. This is our first laugh.

 

This is the correct curve, so we will put it here, so according to what I said, we are all wearing these days, don't let all this, they use one inch or two inches depends on your high level. This may have a good thing for you, you saved a violin. In the room, you will see this in my tent, I want to get the most space optimization because I can play now, you cross these, you want to stretch between the wires, we will now pull all hooks, sin It is what we do, we will be in our two main clues. This is where we have mastered.

 

The song of this song is easy to more than two Feettall see Even if you are 2x4, you can even get some good yield timer, because the second tray always wants to receive your light from your light, let them configure an intention Can't think of the tree crown. You have more growth space NASA to give it a judge. I know that in comments, this means how it smells.

 

2021年1月25日星期一

Setting Up An Air-Cooled Grow Light

Set the air-cooled planting lights in the correct way to open up some really interesting areas in the plant world to indoor gardeners, but there is still a lot of confusion about how to set the air-cooled planting lights correctly. They allow indoor gardening throughout the year in warm months, and No need for additional air conditioning. Now, air-cooled reflectors work by allowing cold air to pass through the lamp during operation. The most common design is a horizontally mounted lamp with flanges on both sides to introduce cold air in the above two situations. The designed warm air is designed based on vertically installed lights. The main principle is to use a constant air flow to transfer the heat from the lights and reflectors to the indoor garden. Here we use the six-inch VANQ LED Grow Light, The 720-watt ultra-high solar LED Grow Light powered by the VANQ safety-controlled galaxy electronic ballast can even be a lighting controller. Let us continue to the trickiest part to circulate the air. You need to connect a tandem exhaust fan to the reflector, and many growers ask them if they should place the exhaust fan in front of the reflector so that the cold air can be blown to the lamp tube or rear light.

The reflector makes it absorb warm air. Does anyone ask this question really make any difference? Let's first look at how to ideally set up a single air-cooled lamp to establish some basic principles, you should get air from a dedicated input like this in an adjacent room with cool air, or from a cool outdoor wall and duct directly into the air-cooled reflector , Please use flanged pipes and Jubilee clamps to form an airtight seal. At the same time, it is important to make the pipe as straight as possible. Remember to give yourself enough slack so that you can grow light and lower the nextlet regarding air filtration and Discussion of fan location Embedded exhaust fans are usually designed to be placed near the outlet vents so that they can draw or suck in air from the room. When used as part of an air-cooled lighting system, it is best to blow air above the lamp, because your in-line fan is the location of the air-cooled reflector. Not only does blowing cool air reduce wear and tear, compared to always sucking in warm air, the fan motor The air will tear, but you will better control the air circulation in and around the garden. Positive pressure will be generated inside the air-controlled lighting ventilation system (if there is a leak), and the air will splash into your garden and be caused by others. On the one hand, your Gardensventilation system sucks to create negative pressure inside your air-cooled lighting ventilation system, so any leaks will suck in unfiltered air in your garden.

You should replace the lamp every six to nine months to disconnect the power and unscrew the glass cover. The reflector has a quick-release screw. If the lamp has been in operation recently, your life will be easier for at least half an hour. Cool, then unscrew the lamp screw, use a piece of authorized thin paper to rotate the lamp counterclockwise, screw the new lamp clockwise into the accessory to avoid leaving fingerprint marks on the lamp. The clip fixes the air duct to a port on the reflector, and then connects the other end of the air duct to the air outlet of the six inchinline fans. Set the air-cooled lights in the correct way and they can clear up to 70% The heat generated by the growth lamp glass panel and the air-cooled reflector do absorb some light, especially ultraviolet rays, so it is important to keep the reflector glass panel clean, free of dust and no fingerprints. Finally, simply set up multiple air-cooled grille lights, you can connect them in series like this, but inevitably you need a reflector. The end of the series will be warmer than the reflector at the beginning. Usually, you should not connect more than two. 6-inch air-cooled reflectors or more than four 8-inch reflectors to achieve maximum cooling efficiency, to introduce a trunk air-conditioning pipe, and use t pipes to provide services for each light, using the same principle to extract air.

2020年12月12日星期六

6 mistakes you can avoid using LED grow lights!

In today's, we will discuss six mistakes to avoid. Before I watch the entire article to show support, the LED lights will light up. Then it’s great to open any content that you know about the published effects. It’s great to miss the future, so even in the compulsive channel, I don’t think we are talking about adding light. Many people ask me about LEDs via email. , So I thought I knew something about it.

 LED is considered to be a relatively new technology. Many people are switching from HPS to lighting, because in the long run, the use of LED will see how much money. First of all, we want to avoid using LEDs for plant growth lights instead of setting the LEDs to an appropriate distance. This may be the biggest mistake of many new growers, making each grow light manufacturer require a different light distance, so please make sure Do you know what it is, not just assuming it is 18 inches, 24 inches or even 36 inches, I also used two platinum LED p450s, which are 18 to 20 inches from the top of the factory, but some lighting companies have different specifications , So if your light is too strong, make sure that if they are too far away, they will burn, but if they are too far away, they will change you from thin to tall, especially in the early stages of vegetables, next is watering, I know you want to understand this through your LED grow lights.

 




Now, this is more suitable for old-fashioned og growers who have recently switched from HBS bulbs. Remember, these bulbs emit heat faster than the soil that LEDs emit faster than the soil that does not emit heat, so naturally it will follow The same watering schedule, so you must consider not having to use LED watering frequently. The third biggest mistake is to choose the wrong type of LED light. Most of the LEDs, including my p450, are full spectrum lights. But please note that some models of switches can change the frequency spectrum, and then there are some lights, such as the piper's LED, which are more used in the vegetable stage. You need to spend money on LEDs to make sure you do research first. In fact, another article that has been introduced is to choose low-quality LED lights.

You know that those unnamed 1000-watt LEDs found on Amazon sell for $100. Yes, remember to pay. Don't buy low-quality LEDs, which can save money, because in the end, the No. 5 light will not provide enough lighting for the plants, so you will spend more money to improve the lighting. I mentioned it before, but you don't want tall plants to eventually fall down. I wish I knew this from the beginning and eventually had to use toothpicks and a twisty tie to make my seedlings stand up, as I said before. Check your light distance specification and check how much light is out. If you have 4 x 8 feet 10 coverage, you can use light that can cover 2 feet x 2 feet.

 

Finally, the sixth mistake is to avoid using LED grow lights. The schedule is incorrect. I know that many people like car flowers. It is recommended that you use 18 to 6 or 24 hours life cycle, 18th century vegetables and 12 12 flowers, so please make sure you also get a digital timer and provide the correct The life schedule is based on your seed type. Hi everyone, I hope you like this video. If you have any other questions, I want to continue watching another video. Put it in the comments section and we will summarize the article, but if you like the article and want more, please give me a thumbs up.

2020年11月20日星期五

How to germinate your cannabis seeds!

Even if the seed cannot actually be named for legal reasons, it is easy to germinate the seed. The first thing we might say is not all seeds germinate at the same rate. Some may germinate within a few days, while others may take a few days.

It takes several weeks for germination. Check your seeds first. They should be brown, hard and dry. If they look green and fresh, they are not yet ripe and will germinate seeds. The required equipment is incomplete. Cutting-edge technology, two boards, four boards, kitchen paper rolls. Some distillation works like this. Don’t forget to moisten the seeds first, but don’t soak the kitchen paper with distilled water, then place two of them on top of the sheets Place a plate, place four beds, and then separate the seeds about an inch, then place the remaining two sheets of paper on top, and press lightly.

They eventually twisted the second plate, placed it on top to form a dome, and then placed the seeds in a dark and humid place to help them germinate. Heat it up a bit to keep it in the temperature range of 70 to 90 degrees Fahrenheit, and then check to see if the paper is used up in the next few days, but don’t over soak it, you will know that when the seeds germinate, they will crack. This is the so-called taproot will begin to grow at this stage, resisting the temptation to touch.

Your seeds are very fragile and easy to multiply bacteria, so the seeds will become smaller than a two-inch flower pot. Use compost to almost fill the top. Make a small hole about a quarter of an inch in the center o f the compost with a pencil, and use tweezers to gently transfer the germinated seeds into a spray bottle to moisten the soil and keep the taproots facing down. But if the compost is too wet, the seeds May wither.

Now let’s talk about the second part, which is lighting. Of course, healthy germinating seeds must be moisturized by sunlight. My experiments have proved that 10W-50W LED Grow Light is most suitable for cultivating seeds to germinate. LED lighting can not only provide plants with the nutrients they need, Can also accelerate the efficiency of growth.

If you are worried about how to choose LED lights for germination, I highly recommend you to search for VANQ LED Grow Light, they specialize in LED research, and the quality of the lamps is guaranteed. If you like this article, please click below Join us in the comments section.

2020年11月11日星期三

Hydroponic Cucumbers-grow LED lights indoors

I teach 10-12 grade agriculture courses in a high school, so I decided to let my students use LEDs to grow cucumbers in a controlled environment. Hydraulic grille lights. The light I choose for cucumber growth is VANQ T8 light, which can easily cover 2x2. The metal halide or high-pressure sodium lamp T8 with an area of ​​more than 400 watts uses 84 3 watt ultra-high output LEDs, with an expected lifespan of 12 to 15 days, a power of about 130 watts, and the patented six-belt cucumber plant with large leaves and beginning to bloom.


The cucumber I chose is a variety called pica lino. It can produce all female flowers without pollination, so it is very suitable for growing indoors or in a greenhouse on the 25th day. Due to powdery mildew, it has removed some leaves. Even with powdery mildew, the plant showed tremendous growth. I was surprised how many flowers bloomed in such a short time on the 30th day, there were no signs of powdery mildew, and many new leaves were replaced. Some cucumbers began to grow.


The armor-piercing T8 is worthy of the name, because it can penetrate many canopies and induce many flowers and flower buds to be actually loaded. Plant flowers and new buds within 25 days after transplantation. After the cucumbers are removed, they grow at an alarming rate. Picking on the 35th day took 7 to 10 days. We harvested the first batch of grapes and one of my students. In the end, we picked 8 cucumber dat from the vine, which was our last harvest, because the cucumber plant has completely exhausted its life and produced 191 cucumbers. My students and I like to eat fresh things. We also sell it to our employees. With the help of many other cucumber schools, we eventually raised $125 to maintain and support our indoor garden.


To my surprise, VANQ Hydroponic LED Grow Light T8 can produce 191 cucumbers in an area slightly larger than 4 square feet. In this region, the penetration cost of water and electricity growth T8 is $649 for three years. The 12-year warranty from the day the lights are turned on is only $54 per year. I can easily repay my money within 24 weeks. My class has 3 cucumbers provided by school staff, the price is 5.00 US dollars, they are organic seeds, we do not use any herbicides, pesticides or fungicides, our cucumbers increase the value and demand of our products, to us The demand is so great that I must start reducing the number of people who pay in advance to ensure that if we sell all 191 cucumbers, they will have the next right to pick them. They could have sold 63 bags of luggage for $5 and could raise $115 in 3 days and 80 days.


You can pay for these two cucumbers. After that, in the next 11 and a half years, for every cucumber planted, the school community association may be a non-profit organization, or even an individual, and a healthy and good organization. The high yield index of a plant is the number of days the roots have grown since the 1980s. The root system of cucumber is the healthiest root system. I see them very white. I am a pioneer in Sookie's contribution to VANQ growers because it generates almost no heat. To help me lower my body temperature, a lot of oxygen enters the VANQ spectrum. Insufficient light can also have a huge impact on plant health and high yields. Looking forward to buying more lights from VANQ from the classroom





2020年11月3日星期二

Build your own growth light

Okay, this is my hydroponic grow light bar on the Costco shelf. This is how they connect. So basically, if you look closely at the plus sign, there will be a plus sign and a minus sign, so there will be a plus sign there, so all you have to do is connect the red wire to the bidirectional black wire and use the minus sign Location, I'm tying them together here just to tell you not to shrink, so you just need to connect them like this, then shrink the wrap, then shrink the wrap and what I put here, and then align them. To keep everything smooth, I didn’t wear a zipper, but all I had to do was put the zipper every few inches to prevent us from falling and connecting together. For power supplies, this is really simple.


Our power source is a 12 amp power source. This line is just one line. You can connect three wires to the back of the computer or monitor. Black, white and green, so if you look here, the wire connecting L to black is white, and then the green wire is inserted here, so you can connect these three ways and loosen it, it's easy, you just need to loosen Open any one of the wires, then tighten to tighten the wires, put them in, here you will also see the VV plus sign, so you want the red wires to appear in these V Plus, and you need another root yes , Just like I started inserting it to tell you that this will be a lurking wait. I tell you, this is how you grow and make money. Okay, this is the shelf. As you can see, the red tie is installed. They stay bright now. I just want to tell you the difference between LED lights.



I installed an LED hydroponic light here. I want to shrink it a bit. If you notice a difference in height, there will be more space between this part and this part for fluorescent lights. In fact, the growth space for plants is relatively small. If you look here, you will find that these pea sprouts are now about 3-4 inches, they still have a lot of room to grow, so they need to be wired here again, so use v- and v+ as roots. Lifted his head in front of him. You demonstrated how to wire and then plug in the main power supply on the left. Just plug in my fluorescent lamp. The lamp here is connected to Yes, the main power supply is to ground the white wire to the end, and then ground the black wire to L. Then all the final Joe is installed here. I will 3D print it separately or just replace it from another shelf




2020年10月28日星期三

How to hang LED planting lights in planting tents

Hello everyone, this article will tell you that suspending grows brighter in growth, and guide you through different choices involving suspending, which can show the light footprint of our light intensity, which changes once and grows into this setting according to distance. The most common and easiest way is to attach a VANQ grow light. The LED growing light usually comes with a metal hanger with a metal ring at the end, and then a ratchet-type metal hanger is hung from the height-adjustable rope to provide space between the top and the tent and grow. The light so that he doesn’t stand up when he hangs the hanger. The light grows better than he wants. This is our favorite guide. Hang it on the top of the edge of the tent, and then combine them with the real The tent is connected again to project the adjustable ring ratchet can lower or lower the life base of the suspension type.

Ko0

We need to show you two static pictures of different suspension alternatives with light intensity, so before you can hang it, this is the most important part of setting your total cost to face the correct height of the growing light in the laboratory. Recently, the stronger the light they will receive prevents us from measuring the number of micromoles per square meter per second in the previous picture with ppfd. We use the Apogee MQ 500 quantum meter for quantum sensors. We understand that most winemakers are here. In this case, there is no tool to directly measure the specifications of ppfd manufacturers. It is necessary to rely on small herbs and spices to grow well under low light of about 200 ppfd, and penetrating plants such as tomato pepper hemp that want more intense light hemp seedlings It usually requires 100 to 150 ppfd during the growth period of contemplative plants, and 300 to 500 PTFE 600 PPV or higher during the flowering period, assuming that all nutrient solution temperature and humidity and other conditions are also very suitable for adjusting light to suit your plant ppfd needs Adjust the light intensity by moving the growth light up or down, causing the value of planting light brands, but the theory is always the same. We mainly want you to understand the great influence of height on ppfd.

Kou

We see that the growth light of the fifth group is about 450 D when it reaches 2 feet, and if we drop to 1 foot we are far more than 1000 ppfd, which is the previous double multi-measurement. Another thing to consider is the area covered by the light footprint. With light, we now see that the sensor is almost at the bottom in the corner of the tent, and the closer light is still on or your plant canopy. When we move the light up, the tiny chance between the footprints will become that the photons it emits will spread In the size of the area, it is important to increase the light footprint, because it is necessary to provide enough life to provide you with this information to the plants at the edge of the total space. Hope you can better understand the flow of light and the way according to your plants and you Grow up to adjust your land

2020年10月14日星期三

Choosing the best LED plant growth light - plant growth guide

How lighting solutions can change the future of cannabis cultivation. The era of growing cannabis in the sun no longer exists. This is just manual management of the schedule. The reliance of large field cultivators on modern technology exceeds the cannabis production they have never improved. Thanks to cannabis growers in many states in the United States. Strive to increase output through innovation. In terms of revolutionizing the future of cannabis, lighting systems are among the top three.

It will grow under full-spectrum light in 2019. Each strain has specific lighting requirements, so finding a uniform light source every time you are busy is an ideal process. If you grow up with different types of advantages to solve this situation, industry experts have realized that you need not only a factory with a LED grow lighting spectrum but also a full-spectrum lamp with preset lighting formulas provided by multiple companies. Therefore, the field cultivator can focus more on adjustment. Where feasible, no adjustments will be made to increase the density of cannabis cultivation or the bidding of biomass energy. The lighting showed that in the harvesting process, the output increased by more than 20% through simple dimming. Together with him, he has developed many succulent VANQ LED lighting systems. Generally, field cultivators choose LED systems to save energy costs. But due to lack, they quickly adopted this option, resulting in a decline in production. Realizing that power is factual power is an important factor for people to get rid of the troubles of LED grow light cannabis solutions.

The growing VANQ specially designed a new technology system for LED hemp cultivation, called GLXM LED. The lighting system that the company has already started is scheduled to be listed on a3i in the first quarter. At the same time, factory lighting will still be put into production in 2019. In the past decade, the cultivation of organic light-emitting diodes or OLED hemp has turned to LEDs. Methods They are very popular among cannabis distributors. The need to switch from LED to OLED is because OLED technology is superior to ordinary LED lighting systems in many ways. Why OLED technology only needs a total area of ​​only a few inches and the same light intensity as previous LED systems. Field cultivators can increase the growth of hemp, produce almost no or even no heat, which will greatly reduce the cost of using HVAC systems and save energy.

With the advent of these new lighting technologies, this amazing technology is a plus. The market has changed a lot, and it will greatly change the lifestyle of cannabis. The cultivation of the hemp industry has undergone tremendous changes during the growth process. In the coming year, innovations such as facilities and technology may become very popular. You look forward to trying these next cool lighting systems.

2020年10月9日星期五

Comparative lighting of cannabis: sodium, LED and LEC systems

Today, we will show you the difference between the three main types of professional lighting for indoor crops. The comparison is based on an approximation of the cultivation standard of 600 watts per square meter. The first device used for this comparison is well known. This is a kit made of more than 600 kinds of high-pressure sodium, which has been in the crop market for a long time and is widely known. For comparison, we used a 600-watt ballast and hybrid bulb. These teams have been using this field for a long time.

 

This is why its price is cheaper than mine, but in fact, this is the only advantage. The remaining price is inconvenient for their electricity consumption or monthly electricity bills. Their power wattage is very low. We must change the lights every three seasons. The heat it emits is also annoying. The yield obtained using this sodium device is 0.8 g to 1 g. For this particular team, per watt of power, we can achieve 500 grams of output for each installed device. In this case, the second system in this comparison is the panel system. According to the manufacturer, this is 340W Led 600W.

 

So far, these LED panels have not been used in large quantities to reduce prices and improve the products of chip manufacturers, thus occupying the market for a long time. Using 1.4 watts per watt, ta output is 1.1, that is to say, using these characteristics of the panel, we will get about 400 grams of harvest. The team’s advantage is that it generates very little heat, does not actually generate heat, consumes less power, and has higher performance. Compared with traditional lamps, it hardly gets hot, which is why they are very suitable for air-conditioned and non-air-conditioned situations. Finally, we have the LEC system. The latest system on the market is the ceramic lamp, which is a development of the sodium system. In this case, we have a LEC system under the VANQ brand, whose ballasts and bulbs are manufactured by PHILIPS, which is the main driving force for this new technology in the market.

 

Since 2016, it has been sold on the Spanish market. These systems are more efficient and generate less heat. We can use the LEC system to get 1.6 to 1.8 grams of powder per watt, especially through the team, we can perceive 510 grams of dried flowers. The main advantage of LEC lighting equipment is that it generates very little heat, and the light generated can pass through plants through ultraviolet and infrared light in the spectrum. How many of you know that this is useful for producing more resin, and high-quality crops are very useful. In fact, the lamp is replaced every 6 or 7 crops, so the price is not high compared to high-quality sodium equipment.

 

The only drawback we found in this team is the price increase, because the only ballast and bulb manufacturer at the moment is Philips, for the rest of us, he will need to wear sunglasses or sunglasses to protect them from UV rays. These devices. He is clearly a comparator.

2020年9月24日星期四

LED plant light-Q&A about plant lighting

Hello, this is VANQ plant light. We have received many inquiries about plant lights and plant lights via email. These plant lights often ask the questions I want to answer. One problem is that my palm is different from the old palm.


Like a foot: Which led light is correct? Yes, this is about cool plants. If you need a plant light that can emit this light and red light at the same time, and also emit red light in a balanced manner, they need coordinated overall growth and may form beautiful flowers. For this, it should not only Only a balanced growth plant, we can complete it together with the staff. The question here is about another planet in the extra room. I am growing paprika and two small lemon trees. Now, I'm not sure which kind of lighting is suitable for the plants we explicitly use for harvesting, such as crops or crops such as pineapples, because these are basically the same as our green plants and show a balanced red and red color. Blue light, ultraviolet light, and infrared light. After that, other lights (such as blue, purple, crimson, or even orange) will have a positive impact on the crops, and anyone who has the opportunity should try it here.

LED plant light-Q&A about plant lighting_c0408966_12451229.png

This is a frequently asked question: How long should I irradiate plants every day? Do I need extra light to save the winter, so here, you must distinguish the purpose of plant lighting? If the plants outside in summer stand and stay healthy in winter. For the second spring, if you want to overcome this problem, it usually takes eight to nine hours of lighting time, but, for example, harvesting tomatoes and then requires twelve hours of lighting time, which is too bad.


The second part of the problem does not use the same light source for overwintering like all other applications. It is often asked how the optimal distance from plant light to plant is basically the same. Therefore, the distance must be selected so that the light of the whole plant is very high. It's good, but the natural light needs of different plants also play a role, which is why it's difficult in general. Some plants will grow in partial shade, and living plants must be considered in the desert, so you should always use a light close to the plants. The lighting distance from the plants is very small. If you are unsure, it usually starts from 20 cm and can reach up to two meters at the latest.


The contact information at the end of the article will disappear. For you, after you asked some questions about our LED plant light technology, you wrote the first 90 undpflanzs greeting group, these lights do not emit any relevant heat, why? With the help of fan cooling and its loud noise, how can I imagine that the right light in your home is not the LED chain in your garden or the light on the Christmas tree? This does not mean that fan cooling can extend the life and performance of the LED. In our GLMX and GLIC series, the cooling sound is clear and audible, comparable to standard desktop fans. The GT series has a so-called silent fan, which is comparable to PC fans in terms of noise generation. Diesel lamps are suitable for this. In principle, our plant lights are suitable for all rooms. In these rooms, the strong blue-red light and fan noise just mentioned is not a problem. Usually, people will go at night when there are no plants. There is still lighting, so it should be suitable for this sunny day. The light will be suitable for main application areas, such as greenhouses, winter gardens, cellars, and winter garages, as well as all imaginable planting spaces in the house.


One way or another, now we forget. Even though there is the last problem with using this technology in the attached greenhouse, the air humidity is still high. This is a problem, no, of course, it is not a problem. Even in our own nursery, we can use our plants to directly shine and spray water. In this case, there will always be high humidity. If your plants are in a greenhouse, please avoid seeing these open ventilation slots here, so use For plants watered with garden hoses, please read the original table that differs from the plant area. From my point of view, I hope I can remove some of the uncertainty to show that it is not as complicated as usually assumed. If you have other questions about the transplant lighting of our plant lights, we would like to get all the information.

Marijuana Growth Diary-The Importance of Marijuana Growth Lights

Hello everyone, our first Marijuana growth is still pursuing the first successful harvest. As you can see from the plants behind me, I plant...